Sub Zero Covers
Tan insulated backflow cover protecting a fire-line assembly along a commercial fire lane, with tamper switches, supervisory chain, and the FDC connection exposed above the cover.
Commercial fire lane — tamper switches stay accessible

By assembly and size

10" RP backflow cover

10" RP backflow cover sizing starts with the assembly on the tag. At 10", 8 RP assemblies from the brands we pattern for are common: Watts 909 / LF909, Watts 957 / 957Z, Febco LF860 Large, Zurn Wilkins 375 / 375A / 375AST, Zurn Wilkins 475 / 475V, Ames 4000SS, Ames Colt C400, and Apollo / Conbraco RPLF4A large. The price list maps this pipe size to one stock cover, and the published dimensions below say which one to pull.

Request distributor access Talk to sales

What "10" RP" covers on a counter

Reduced pressure zone (RP / RPZ). At 10" the assemblies your customers bring in are Watts 909 / LF909, Watts 957 / 957Z, Febco LF860 Large, Zurn Wilkins 375 / 375A / 375AST, Zurn Wilkins 475 / 475V, Ames 4000SS, Ames Colt C400, and Apollo / Conbraco RPLF4A large. They are not the same size: the Zurn Wilkins 475 / 475V is 29" end to end and the Watts 909 / LF909 is 93.5625", so "a 10" RP" is not a single envelope.

The stock cover for 10"

The April 2026 price list maps 10" to 130 × 55 (DS13055), with the N-shape NS10 for N-pattern installs. That cover was built around this size class; the table below shows how each assembly sits inside it.

Relief valve drainage

Every assembly on this page has a relief valve that discharges downward from under the body. Leave that path open. Close the cover to the pad around the assembly, never under the relief port.

When to measure instead

Unions, strainers, OS&Y gates, and wall-tight mounts all move an assembly off its spec sheet. If the tag is gone or the install is odd, measure it or send photos for a custom cover. For the type as a whole see RP covers; for another size, start at the fitment hub.

Sub Zero Covers sells through distributors only. Distributor accounts see pricing and availability in the portal; everyone else orders through their supply house, or applies for distributor access.

Assemblies at this size

10" reduced pressure zone assemblies and the cover that fits

Dimensions in inches from each manufacturer's spec sheet with standard shutoffs. Length end to end; heights from the pipe centerline. The cover column is the closest stock fit by published length; confirm against the assembly in front of you.

AssemblyLengthAbove CLBelow CLClosest stock cover
Watts 909 / LF90993.5625"45.75"9.75"130 × 55 (DS13055) · N-shape NS10
Watts 957 / 957Z57.75"45.75"11.1875"130 × 55 (DS13055) · N-shape NS10
Febco LF860 Large72.625"17.125"13.75"130 × 55 (DS13055) · N-shape NS10
Zurn Wilkins 375 / 375A / 375AST63.875"24.75"15.375"130 × 55 (DS13055) · N-shape NS10
Zurn Wilkins 475 / 475V · N-pattern29"——N-shape NS10
Ames 4000SS55.75"45.75"12.5"130 × 55 (DS13055) · N-shape NS10
Ames Colt C40057.75"45.75"11.1875"130 × 55 (DS13055) · N-shape NS10
Apollo / Conbraco RPLF4A large62.3"45.8"21"130 × 55 (DS13055) · N-shape NS10

Common questions

Which cover fits a 10" RP?
The 130 × 55 (DS13055) is the price-list match for 10". N-pattern installs take the N-shape NS10 instead.
Do all 10" RP assemblies take the same cover?
Not always. At this size the published lengths run from 29" (Zurn Wilkins 475 / 475V) to 93.5625" (Watts 909 / LF909). Order by model.
Is this a heated enclosure?
No. Sub Zero Covers are insulated, unheated covers (R-13 standard, R-30 extreme weather). They are not ASSE 1060 listed enclosures. Where a spec calls for a Class I heated enclosure, ask sales before quoting.

Related pages