Sub Zero Covers
Tan insulated backflow cover protecting a fire-line assembly along a commercial fire lane, with tamper switches, supervisory chain, and the FDC connection exposed above the cover.
Commercial fire lane — tamper switches stay accessible

By assembly and size

8" DCDA backflow cover

8" DCDA backflow cover sizing starts with the assembly on the tag. At 8", one DCDA assembly from the brands we pattern for is common: Deringer (Ames) 30. The price list maps this pipe size to one stock cover, and the published dimensions below say which one to pull.

Request distributor access Talk to sales

What "8" DCDA" covers on a counter

Double check detector assembly. At 8" the assemblies your customers bring in are Deringer (Ames) 30. The Deringer (Ames) 30 publishes 31" end to end.

The stock cover for 8"

The April 2026 price list maps 8" to 120 × 50 (DS12050), with the N-shape NS8 for N-pattern installs. That cover was built around this size class; the table below shows how each assembly sits inside it.

The detector bypass

DCDA assemblies carry a metered bypass along one side of the mainline. It adds width the stock cover usually accommodates at this size, but send a photo showing the bypass side before quoting; a custom pattern ships in 3–5 business days.

When to measure instead

Unions, strainers, OS&Y gates, and wall-tight mounts all move an assembly off its spec sheet. If the tag is gone or the install is odd, measure it or send photos for a custom cover. For the type as a whole see DCDA covers; for another size, start at the fitment hub.

Sub Zero Covers sells through distributors only. Distributor accounts see pricing and availability in the portal; everyone else orders through their supply house, or applies for distributor access.

Assemblies at this size

8" double check detector assembly assemblies and the cover that fits

Dimensions in inches from each manufacturer's spec sheet with standard shutoffs. Length end to end; heights from the pipe centerline. The cover column is the closest stock fit by published length; confirm against the assembly in front of you.

AssemblyLengthAbove CLBelow CLClosest stock cover
Deringer (Ames) 3031"10.4"5.4"120 × 50 (DS12050) · N-shape NS8

Common questions

Which cover fits a 8" DCDA?
The 120 × 50 (DS12050) is the price-list match for 8". N-pattern installs take the N-shape NS8 instead.
Do all 8" DCDA assemblies take the same cover?
At this size the assemblies we pattern for sit inside the same stock cover. Confirm shutoff type and riser height.
Is this a heated enclosure?
No. Sub Zero Covers are insulated, unheated covers (R-13 standard, R-30 extreme weather). They are not ASSE 1060 listed enclosures. Where a spec calls for a Class I heated enclosure, ask sales before quoting.

Related pages